Konica Minolta bizhub C360 Service Manual page 306

Field Service Ver. 2.1 Feb. 2012
B. Auto Reset
(1) Use
• To set the period of time until auto reset starts functioning in "Copy" and "Scan/Fax."
(2) Procedure
• The default setting is 1 min.
C. Job Reset
(1) When Account is changed
• It will not be displayed when the following setting shows that authentication device is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(It will be displayed when the key counter is mounted.)
<Use>
• Selects whether to reset (initialize) a machine when the key counter is unplugged, a
magnetic card is pulled out, or user authentication/account track is set.
• To select not to reset to the default settings even when the accounts are changed
through the use of a data management device.
<Procedure>
• The default setting is Reset.
(2) When Original is set on ADF
<Use>
• Select whether to reset the function when originals are placed on the ADF.
<Procedure>
• The default setting is Do Not Reset.
(3) Next Job: Staple Setting
<Use>
• To set whether to cancel the staple setting when the staple setting job started and the
next job setting has become available.
<Procedure>
• The default setting is OFF.
(4) Next Job: Original Set/Bind Direction
<Use>
• To set whether to cancel the original set/bind direction when the job (which original set/
bind direction is set) started and the next job setting has become available.
<Procedure>
• The default setting is OFF.
"1 min." (1 to 9, No)
"Reset"
Reset
ON
ON
10. UTILITY
Do Not Reset
"Do Not Reset"
"OFF"
"OFF"
251