10. UTILITY
Function Name
2
Initialize (Network Settings)
• To clear the network related
settings.
Image Log Transfer Settings
• Specifies whether to transfer
the input or output image data
to the server using whenever
MFP inputs or outputs image
data.
Internet ISW Set
• To set firmware upgrading by
Internet ISW, and enable or
disable various settings.
Operation Ban release time
• To set the period of time to be
elapsed before the access lock
state is released in CE pass-
word authentication.
10.6.88
Security Settings-HDD Settings
A. Check HDD Capacity
(1) Use
• To display the used space capacity, total space capacity, and the remaining capacity of
the hard disk.
• To check the capacity and the status of use of the hard disk.
348
2
When Enhanced Security mode is set to
Default Setting
Enabled
Restrict (not to be changed)
OFF
OFF (not to be changed)
OFF
OFF (not to be changed)
The setting value should be 5 min. or more
5 min.
(no value less than 5 can be set)
Field Service Ver. 2.1 Feb. 2012
[ON]