Network Settings-Ssdp Settings; Network Settings-Detail Settings - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
(4) Scanner Settings: Scanner Information
<Use>
• To set the WS scanner information.
<Procedure>
1. Touch [Scanner Information].
2. Enter the friendly name (up to 63 characters) on the on-screen keyboard, and touch
[OK].
(5) Scanner Settings: Connection Timeout
<Use>
• To set the timeout period for connection of WS scanner.
<Procedure>
1. Press the Clear key.
2. Enter the connecting timeout period between 30 and 300 using the 10-key pad.
10.6.50

Network Settings-SSDP Settings

A. Use
• To set whether to use SSDP protocol.
• To set the multicast TTL value.
B. Procedure
• The default setting is ON.
<Multicast TTL Setting >
• The default setting is 1.
10.6.51

Network Settings-Detail Settings

A. Device Setting
(1) MAC Address
<Use>
• To display the MAC address of the machine.
<Procedure>
• The address cannot be changed.
(2) Network Speed
<Use>
• To set the network speed.
<Procedure>
• The default setting is Auto.
"Auto"
100Mbps Full Duplex
NOTE
• When Network speed setting is changed, turn off the main power switch and turn it
on again more than 10 seconds after.
"ON"
"1" to 10
10Mbps Full Duplex
100Mbps Half Duplex
10. UTILITY
OFF
10Mbps Half Duplex
1Gbps Full Duplex
309