Field Service Ver. 1.0 Jul. 2009
3.3.13
Exit motor (M3)
1. Remove the rear cover.
See P.17
[1]
[3]
[2]
6. Reinstall the above parts following the removal steps in reverse.
[2]
A0HTF2C028DA
[2]
[4]
[1]
[2]
A0HTF2C029DA
3. OTHER MAINTENANCE ITEM
2. Remove the harness from the wire
saddle [1] and two edge covers [2].
3. Disconnect the connector [1].
4. Disconnect the connector [1].
5. Remove four screws [2] and the
spring [3], and remove the exit motor
assy [4].
29