10.5 User Settings; System Settings-Language Selection; System Settings-Measurement Unit Settings; System Settings-Paper Tray Settings - Konica Minolta bizhub C360 Service Manual

10. UTILITY

10.5 User Settings

10.5.1

System Settings-Language Selection

A. Use
• To select the language on the LCD display.
• To change the language used on the control panel.
B. Procedure
• The language options depend on the marketing area selected in [Marketing Area] avail-
able from [System 1] under Service Mode.
See P.430
10.5.2

System Settings-Measurement Unit Settings

A. Use
• To select the unit displayed on the LCD display.
B. Procedure
• The default setting varies depending on the marketing area.
mm (Numerical Value)
10.5.3

System Settings-Paper Tray Settings

A. Auto Tray Selection Settings
(1) Use
• To set the tray for automatic selection when APS is being set.
• To establish the priority for switching the Tray when ATS is being set.
(2) Procedure
• Select the tray on the [Auto Tray Select] screen.
• Set the priority on the [Tray Priority] screen.
B. Auto Tray Switch ON/OFF
(1) Use
• To set whether to automatically switch to another tray with same size paper when the
paper feed tray runs out of paper during printing.
(2) Procedure
• The default setting is Restrict.
C. No Matching Paper in Tray Setting
(1) Use
• To set whether to switch to another tray automatically when the specified tray runs out of
paper during printing.
Stop Printing (Tray Fixed) : It stops printing when the specified tray runs out of paper.
Switch Trays (Tray Priority): To switch to another tray with the specified paper and print
(2) Procedure
• The default setting is Stop Printing (Tray Fixed).
"Stop Printing (Tray Fixed)"
188
inch (Numerical Value)
Allow
when the tray is out of paper
Field Service Ver. 2.1 Feb. 2012
inch (Fraction)
"Restrict"
Switch Trays (Tray Priority)