Fax Settings-Tx/Rx Settings - Konica Minolta bizhub C360 Service Manual

10. UTILITY
D. Number of Redials
(1) Use
• To set the number of redials.
• To change the number of times to redial when the line is busy, etc.
• The line which can be set up is different depending on the country.
(2) Procedure
• The default setting is 3 X.
NOTE
• The line which can be set up is different depending on the country.
E. Redial Interval
(1) Use
• To set the interval for redialing.
(2) Procedure
• The default setting is 3 min.
F. Line Monitor Sound
(1) Use
• To set whether to output the line monitor sound from the speaker or not.
(2) Procedure
• The default setting is OFF.
G. Line Monitor Sound Vol.
(1) Use
• To set the volume of the speaker.
(2) Procedure
• Change the volume by touching the [Lower] or [Higher].
10.6.71

Fax Settings-TX/RX Settings

A. Duplex Print (RX)
• It will not be displayed when [Print Separate Fax Pages] is set to "ON."
(1) Use
• To set whether to carry out the duplex print for the received original when receiving fax.
(2) Procedure
• The default setting is OFF.
320
"3 X" (0 to 7)
"3 min" (1 to 15)
ON
ON
Field Service Ver. 2.1 Feb. 2012
"OFF"
"OFF"