Konica Minolta bizhub C360 Service Manual page 1002

Field Service Ver. 1.0 Jul. 2009
[2]
[3]
[2]
[1]
[2]
4. Remove the harness cover [1].
5. Remove three screws [2], and
[1]
A0XWF3C502DA
6. Loosen the adjustment screw [1] and
NOTE
• Do not damage the passage surface
of the right door.
A0XWF3C503DA
• If width A is greater than the specified
value:
[1]
Turn screw [1] counterclockwise.
A0XWF3C504DA
• If width A is smaller than the specified
value:
[1]
Turn screw [1] clockwise.
7. Perform another test print and check
A0XWF3C505DA
5. MECHANICAL ADJUSTMENT
remove the plate [3].
turn screw [2] to make the adjust-
ment.
the reference deviation.
31