15.2 Mechanical Adjustment Of The Bypass Tray Section; Adjustment Of The Bypass Paper Size Unit - Konica Minolta bizhub 200 Service Manual

15. Mechanical adjustment

15.2 Mechanical adjustment of the bypass tray section

15.2.1

Adjustment of the Bypass Paper Size Unit

This adjustment must be made in the following case:
• The Bypass Paper Size Unit has been removed.
[1]
[2]
[2]
218
[3]
[3]
4036fs3050c0
[1]
[3]
[2]
4036fs3051c0
Confidential – for internal use only, do not distribute
Field Service Ver. 2.5 Jul. 2006
1. Install the gear so that the protrusion
of the gear [1] and the mark [3] on
the Bypass Guide Rack Gear [2] are
aligned in a straight line.
2. Install the Bypass Unit Cover so that
part A (edge) [2] of the Rack Gear [1]
for the Bypass Paper Size Unit and
part B [3] of the Bypass Unit Cover
are aligned in a straight line.