Exit Motor (M5) - Konica Minolta bizhub C360 Service Manual

3. OTHER MAINTENANCE ITEM
[2] [1]
8. Reinstall the above parts following the removal steps in reverse.
3.3.12

Exit motor (M5)

1. Remove the finisher from the main body.
See P.14
2. Remove the upper cover.
See P.11
3. Remove the rear cover.
See P.11
4. Remove the accommodation paddle motor.
See P.28
[1]
[1]
20
A0HRF2C020DA
[2]
A0HRF2C021DA
[1]
[2]
A0HRF2C022DA
Field Service Ver. 1.0 Jul. 2009
7. Remove two screws [1], and remove
the duplex path switching motor [2].
5. Remove two E-rings [1] and two
bushings [2].
6. Remove the harness from six wire
saddles [1].
7. Disconnect three connectors [2].