8. COMMERCIALLY AVAILABLE PARTS
8.
COMMERCIALLY AVAILABLE PARTS
8.1
Installing the key counter
8.1.1
Configuration
[1]
[1]
Key counter socket
8.1.2
Procedure
NOTE
• When mounting the key counter, the optional key counter kit KIT-1 (4623-472) is
necessary.
• Procedure for directly mounting the key counter to the main unit is described
below.
For mounting the key counter to the optional working table WT-506, refer to WT-
506 installation manual.
[1]
162
[2]
[3]
[2]
A0EDF2C524DA
Field Service Ver. 2.1 Feb. 2012
Key counter
1. Remove the scanner right cover [1].
See P.58
2. Cut out the knockouts [2] of the
scanner right cover.
3. Remove two caps [3].
[2]
A0P0F2C534DA