Copier Settings-Finishing Program; Copier Settings-Card Shot Settings - Konica Minolta bizhub C360 Service Manual

10. UTILITY
10.5.35

Copier Settings-Finishing Program

A. Use
• Configure whether to display the Finishing Program button in the basic settings screen.
To display the button, register the contents of the finishing program.
Register frequently used finishing functions so that you can set them at once by using
the button that appears in the basic settings screen.
B. Procedure
• The default setting is ON.
• When selecting "ON," select the contents to be registered in the finishing program.
10.5.36

Copier Settings-Card Shot Settings

• It will be displayed only when the following setting is set to "Level 2."
[Administrator Settings] → [Security Settings] → [Administrator Security Levels]
A. Layout
(1) Use
• To set the initial copy layout setting in card shot mode.
(2) Procedure
• The default setting is Top/Bottom.
"Top/Bottom"
B. Zoom
(1) Use
• To set the initial zoom setting in card shot mode.
(2) Procedure
• The default setting is Full Size.
C. Store Original Size
(1) Use
• To pre-register original sizes that are used in card shot mode.
(2) Procedure
• Enter an original size, name it, and register the data.
202
"ON"
Left/Right (Top Half)
"Full Size"
Field Service Ver. 2.1 Feb. 2012
OFF
Left/Right
x 1.0