Konica Minolta bizhub C360 Service Manual page 389

10. UTILITY
D. I-Fax Advanced Settings
• It will be displayed only when [Internet Fax] is set to "ON" in the following settings.
[Administrator Settings] → [Network Settings] → [Network Fax Settings] → [Network Fax
Function Settings]
(1) Use
• To set advanced functions of internet fax.
MDN Request
DSN Request
MDN Response
MDN/DSN Response Watch Time : To set the period to observe the response from the
Max Resolution
Add Content-Type Information
NOTE
• Only MDN Request will be sent when both MDN Request and DSN Request are set
to "ON."
(2) Procedure
• Default settings are shown below.
MDN Request
DSN Request
MDN Response
MDN/DSN Response Watch Time : "24 hours" (1 to 99)
Max Resolution
Add Content-Type Information
334
Field Service Ver. 2.1 Feb. 2012
: To set whether to send MDN (Message Disposition
Notification) request when transmitting through
internet fax.
: To set whether to send DSN (Delivery Status Notifi-
cation) request when transmitting through internet
fax.
: To set whether to response for MDN request made
by the other machine when receiving through inter-
net fax.
other machine when sending MDN/DSN request.
In the case of time over, time out message is noti-
fied.
: To set maximum resolution for reading, TX/RX and
record when internet fax function is being used.
: To set whether or not to add Content-Type informa-
tion when using Internet fax.
When [Yes] is selected, "application=faxbw" is
added as sub-type to MIME Content-Type header.
: "ON"
: ON
: "ON"
: 400 x 400
: Yes
OFF
"OFF"
OFF
OFF
"600 x 600"
"Do Not Send"