Field Service Ver. 2.1 Feb. 2012
10.5.24
Copier Settings-Default Enlarge Display Settings
• Displayed only when you select [Utility/Counter] → [User Settings] → [Copier Settings] in
the enlarge display mode.
A. Use
• To make default settings for the enlarge display mode.
* The machine is initialized at the following timings:
• The main power switch is turned ON.
• Panel is reset.
• In an Interrupt mode.
• Auto Reset
• The password entry screen for account track is changed.
B. Procedure
<Current Setting>
• The settings made on the control panel before entering the setting menu screens are
registered as the default settings of copy functions.
<Factory Default>
• The settings made at the time of shipment from the factory are registered as the default
settings of copy functions.
10.5.25
Copier Settings-When AMS Direction is Incorrect
A. Use
• To set whether to print when the original is set in different direction from the set paper
during auto zoom select.
Print
: To print according to the selected direction and size of paper
Delete Job : To display alarm and cancel the job
B. Procedure
• The default setting is Print.
10.5.26
Copier Settings-Separate Scan Output Method
A. Use
• To set the output mode at Separate Scan setting.
Page Print : Print consecutively during the read operation.
Batch print : Print all at once after reading all data.
Copy setting can be changed after the read operation.
B. Procedure
• The default setting is Page Print.
"Print"
"Page Print"
10. UTILITY
Delete Job
Batch Print
199