Copier Settings-Auto Sort/Group Selection; Copier Settings-Default Copy Settings - Konica Minolta bizhub C360 Service Manual

10. UTILITY
10.5.22

Copier Settings-Auto Sort/Group Selection

A. Use
• Selects whether to use the auto sort/group selection function when a job has output of
two or more sheets.
Yes : Automatically disables the Auto sort/group selection when a sheet of original is
placed on the ADF and the start key is pressed. Automatically enables the Auto
sort/group selection when two or more sheets of originals are placed on the ADF
and the start key is pressed.
No : Disable the Auto sort/group selection.
B. Procedure
• The default setting is Yes.
10.5.23

Copier Settings-Default Copy Settings

• This menu is unavailable if user authentication is not made while either of authentication
devices is set to Set in the [Service Mode] → [Billing Setting] → [Management Function
Choice].
• This menu is not available when the key counter is set or when a warning appears to
inform that the vendor's main power switch needs to be checked or coins (a card) are not
inserted under the condition where the vendor is set to Set in the [Service Mode] →
[Billing Setting] → [Management Function Choice].
A. Use
• To make default settings for the copy mode.
* The machine is initialized at the following timings:
• The main power switch is turned ON.
• Panel is reset.
• In an Interrupt mode.
• Auto Reset
• The password entry screen for account track is changed.
B. Procedure
<Current Setting>
• The settings made on the control panel before entering the setting menu screens are
registered as the default settings of copy functions.
<Factory Default>
• The settings made at the time of shipment from the factory are registered as the default
settings of copy functions.
198
"Yes"
Field Service Ver. 2.1 Feb. 2012
No