Field Service Ver. 1.0 Jul. 2009
3.3.2
Front cover
[2]
[1]
3.3.3
Rear cover
A. Removal
1. Open the reverse automatic document feeder.
[1]
[2]
A0HUF2C009DA
[1]
A0HUF2C010DA
[1]
[3]
A0HUF2C011DA
3. OTHER MAINTENANCE ITEM
1. Open the reverse automatic docu-
ment feeder.
2. Remove two screws [1] and remove
the front cover [2].
NOTE
• If the reverse automatic document
feeder is set to be lifted up at
angles up to 60 degrees due to the
set position of the stopper for the
hinge, change the set position to
the lower side so that the reverse
automatic document feeder can be
opened completely.
2. Remove two screws [1].
3. Open the left cover.
4. Lift up the document feed tray.
5. Remove the screw [1] and remove
the rear cover [2].
NOTE
• Be sure to press down part [3] in
the picture to prevent any damage
when removing the rear cover.
17