Konica Minolta bizhub C360 Service Manual page 474

Field Service Ver. 2.1 Feb. 2012
(6) Receive-Mail Check
<Use>
• To set whether or not to use mail check and the time interval for the POP server used for
the CS Remote Care.
• To change the time interval for mail check.
<Procedure>
• The default setting is No.
(7) Receive-Connection timeout
<Use>
• To set the timeout period for connection during reception.
<Procedure>
• The default setting is 60 Sec.
(8) Receive-APOP Authentication
<Use>
• To set whether or not to authenticate the APOP during reception.
<Procedure>
• The default setting is No.
(9) Send-SMTP server
<Use>
• To set the SMTP sever address for transmission used for the CS Remote Care.
• SMTP server address can be set by the IP address or the domain name.
<Procedure>
<Input IP Address>
• IP address version 4 format
[0 to 255].[0 to 255].[0 to 255].[0 to 255]
<Input FQDN>
• Enter the domain name.
(10) Send-SMTP port number
<Use>
• To set the SMTP port number for transmission used for the CS Remote Care.
<Procedure>
• The default setting is 25.
"No" (1 to120 min., No)
"60 Sec" (30 to 300 Sec)
Yes
"25" (1 to 65535)
12. SERVICE MODE
"No"
419