Field Service Ver. 2.1 Feb. 2012
[2]
NOTE
• When the printer control board is to be replaced, rewriting the firmware to the lat-
est one.
5.5.47
Service EEPROM board (SVERB)
1. Remove the printer control board.
See P.98
[2]
2.1
[1]
A0EDF2C150DA
[1]
[1]
A0EDF2C151DA
[3]
[2]
A0EDF2C152DA
5. OTHER MAINTENANCE ITEMS
6. Disconnect all connectors on the
printer control board.
7. Remove six screws [1], and remove
printer control board [2].
2. Disconnect the connector [1].
3. Remove two screws [2], and remove
the service EEPROM board [3].
NOTE
• When the Service EEPROM board is
replaced to the brand-new one, the
error "License management error
occurred." will be occurred.
In this case, it is necessary to repair
the i-Option license management
information.
See P.759
99
2.1