Field Service Ver. 2.1 Feb. 2012
10.6.76
Fax Settings-Multi Lines Settings
• It will be displayed only when the optional fax kit (FK-502) line 2 is mounted.
A. Line Parameter Setting
(1) Dialing Method
<Use>
• To set the dial method for the expanded line.
<Procedure>
• The default setting is PB.
NOTE
• The displays are different depending on the country.
(2) Number of Rx Call Rings
<Use>
• To set the number of RX call rings for the expanded line.
• To change the number of artificial ringback tones with expanded line when receiving calls
until it starts receiving operation.
<Procedure>
• The default setting is 2 X.
(3) Line Monitor Sound
<Use>
• To set whether or not to output the line monitor sound of the expanded line from the
speaker.
<Procedure>
• The default setting is OFF.
B. Function Settings
(1) PC-FAX TX Setting
• This setting does not appear when "RX Only" is selected for [Multi Line Settings].
<Use>
• To set the number of the line used for PC-FAX transmission.
<Procedure>
• The default setting is No Selection.
"No Selection"
"PB"
"2 X" (0 to 15)
ON
Line 1
10. UTILITY
10 pps
"OFF"
Line 2
331