Leading Edge Grip Solenoid (Sd3) - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.0 Jan. 2010
[2]
6. Reinstall the above parts following the removal steps in reverse.
3.3.15

Leading edge grip solenoid (SD3)

1. Remove the saddle unit.
See P.7
[1]
[2]
[1]
A10DF2C024DA
A10DF2C022DA
A10DF2C025DA
3. OTHER MAINTENANCE ITEM
5. Remove two screws [1], and remove
the center fold plate motor [2].
2. Lay down the saddle unit as shown
in the illustration.
3. Remove the E-ring [1], and remove
the drive lever [2].
19