Adf Scan Glass Contamin. Set; Adf Scan Glass Contamin. Warn/Level; Stamp - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
12.9.13 ADF Scan Glass Contamin. Set.-ADF Scan Glass Contamin. Warn/Level
2
A. Use
• To set how to display the warning when stain on the ADF original glass is detected.
• Use when changing the display of the warning which requests the cleaning of the stain
on the glass detected by the pre-detection of the lines.
0: Warning will not be displayed.
1: Warning will be displayed by the maintenance mark. (warning code: D-1/D-2)
2: Warning will be displayed on the message area on the basic screen.
3: Warning will be displayed on all screens.
NOTE
• This setting is invalid when [ADF Scan Glass Contamin. Sensitivity] is set to "Not
2
Set."
B. Procedure
• The default setting is 2.
0
12.9.14 ADF Scan Glass Contamin. Set.-ADF Scan Glass Contamin. During Scan
2
A. Use
• To set the operation for cleaning on the ADF original glass when feeding the original.
• Use when changing the operation for cleaning on the ADF original glass when feeding
the original.
0 : Cleaning is not conducted as the cleaning brush does not rotate.
1 : Glass is cleaned with the cleaning brush rotating at two originals intermittent.
B. Procedure
• The default setting is 1.
12.9.15

Stamp

A. Use
• To set the mounting status of the optional stamp unit SP-501.
• To use when setting up the stamp unit SP-501.
B. Procedure
• The default setting is Unset.
1
0
Set
12. SERVICE MODE
"2"
"1"
"Unset"
3
447
2