How To Open Pwb Box - Konica Minolta bizhub C360 Service Manual

5. OTHER MAINTENANCE ITEMS
[2]
NOTE
• When the hard disk is replaced, select [State Confirmation] → [Memory/HDD Adj.]
→ [HDD Format] in Service Mode for logical format.
After formatting the HDD, make the settings below as necessary.
2.1
- Reinstallation of movie data and OCR dictionary data.
See P.452
- Resetting of HDD lock password
See P.350
5.5.36

How to open PWB box

1. Remove the rear right cover.
See P.56
2. Remove the lower rear cover/1.
See P.57
3. Remove the lower rear cover/2.
See P.57
[3]
84
2.1
[1]
[1]
A0EDF2C113DA
[1]
[2]
A0EDF2C114DA
Field Service Ver. 2.1 Feb. 2012
5. Remove four screws [1], and remove
the metal plate [2].
6. To reinstall, reverse the order of
removal..
4. Remove the harnesses from the wire
saddle [1], and disconnect two con-
nectors [2] and USB connector [3].