Take-Up Motor (M8) - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 1.0 Jul. 2009
3.3.15

Take-up motor (M8)

1. Remove the rear cover.
See P.17
[1]
[2]
5. Reinstall the above parts following the removal steps in reverse.
[2]
A0HTF2C025DA
[1]
A0HTF2C026DA
3. OTHER MAINTENANCE ITEM
2. Remove the harness from the edge
cover [1].
3. Disconnect the connector [2].
4. Remove two screws [1], and remove
the take-up motor assy [2].
31