Konica Minolta bizhub C360 Service Manual page 653

All-in-one color laser mfp
Hide thumbs Also See for bizhub C360:
Table of Contents

Advertisement

19. TROUBLE CODE
Code
Item
CD002 JOB RAM save error
CD004 Hard disk access error
(connection failure)
CD00F Hard disk data transfer
error
CD010 Hard disk unformat
CD011 Hard disk out of
specifications mounted
CD020 Hard disk verify error
CD030 Hard disk management
information reading error
CD041 HDD command execution
error
CD042
Address Mark Not Found
CD043
CD044
CD045
CD046
CD047 HDD SCSI library error
CD048
CD049
CD04A
CD04B
CD201 File memory mounting
error
CD202 Memory capacity
discrepancy
CD203 Memory capacity
discrepancy 2
CD211 PCI-SDRAM DMA
operation failure
CD212 Compression/extraction
timeout detection
CD231 No FAX memory at FAX
board mounting
CD241 Encryption ASIC error
598
Detection timing
• The error in save of job data to the memory/
hard disk and its read error are detected.
• Unable to communicate between the hard
disk and printer control board (PRCB).
• Data transfer from the hard disk is faulty.
• Unformatted hard disk is connected.
• A hard disk that falls outside the specifica-
tions is connected.
• The data abnormality is detected by the
HDD verify check.
• The machine fails to read administrative
information data saved in the hard disk.
• The error occurred inside the hard disk.
• The error occurred inside the hard disk.
• The file memory is not mounted.
• The file has any abnormality.
• File memory capacity on the MFP board
(MFPB) is not enough.
• File memory capacity necessary for duplex
printing is not enough during duplex unit
mounting.
• File memory capacity on the MFP board
(MFPB) is not enough.
• Hardware related to the transfer of memory
image of the MFP board (MFPB) fails to
respond.
• Hardware related to the BTC compression
function of the MFP board (MFPB) fails to
respond.
• The DIMM for FAX is not mounted during
the FAX board is mounting.
• The FAX board is not mounted when the
FAX board mounting is set ON at Service
Mode.
• Initialization error of the encrypted ASIC is
detected during the machine is starting.
Field Service Ver. 2.1 Feb. 2012
Trouble iso-
lation
Rank
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub c280Bizhub c220

Table of Contents