Switch Back Solenoid (Sd1) - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 1.0 Jul. 2009
3.3.9

Switch back solenoid (SD1)

1. Remove the rear cover.
See P.17
[3]
[1]
[2]
[3]
A0HTF2C023DA
[2] [1]
A0HTF2C024DA
[2]
[3]
[1]
A0HTF2C500DA
3. OTHER MAINTENANCE ITEM
2. Disconnect the connector [1].
3. Remove the harness from two edge
covers [2] and the wire saddle [3].
4. Remove the screw [1] and the spring
[2], and remove the switch back sole-
noid [3].
5. Reinstall the above parts following
the removal steps in reverse.
NOTE
• When installing the screw [1], align
the dowel [2] with the scale [3] with
which the dowel was aligned before
the screw was removed and then
tighten the screw.
25