Konica Minolta bizhub C360 Service Manual page 205

7. FIRMWARE REWRITING
7. Control panel shows F/W items to be updated, and select the particular type of F/W to
be updated. (Select [YES].)
F/W to be updated
MFP CONTROLLER
SCANNER
PRINTER
FAX BOARD CONTROLLER1 Fax board (Main)
FAX BOARD CONTROLLER2 Fax board (Sub)
ADF (DF-M)
FINISHER
RU
SD
DSC1
DSC2
NOTE
• Unless one of the keys on the control panel is pressed, firmware is automatically
updated after 30 seconds when the main power switch/sub power switch is turned
on.
• When the BootRom file is in the firmware data, [RootRom] key is displayed. Press-
ing the key updates data.
• When more than one firmware are stored in step 1, pressing [FW Data Select]
enables selection. (Data of other models cannot be selected.)
(Data with * at the left top of data selection screen will be the default data copied to
the root directly in the USB memory.)
150
Appropriate board
MFP board (MFPB)
MFP board (MFPB)
Printer control board (PRCB)
DF control board (DFCB)
FNS control board (FSCB)
Transfer control board (TRCB)
SD drive board (SDDB)
DSC board
Not used
Field Service Ver. 2.1 Feb. 2012
A0EDF2C514DA
Remark
Only when the FK-502 is mounted
Only when the FK-502 is mounted
Only when the FS-527/529 is
mounted
Only when the SD-509 is mounted
Only when the SC-507 is mounted