3. OTHER MAINTENANCE ITEM
3.3.5
Upper tray
1. Remove the separator.
See P.5
[1]
3. Reinstall the above parts following the removal steps in reverse.
3.3.6
Paper guide plate
1. Remove the separator.
See P.5
2. Remove the upper tray.
See P.8
[2]
[1]
[1]
5. Reinstall the above parts following the removal steps in reverse.
8
[2]
[3]
A083F2C007DA
[1]
A083F2C503DA
A083F2C504DA
Field Service Ver. 1.0 Jul. 2009
2. Remove the screw [1]. Push two pro-
trusions [2] in the directions of the
arrows and remove the upper tray
[3].
3. Remove two screws [1] and remove
the paper guide plate cover [2].
4. Remove eight paper guide plates [1].
NOTE
• When reinstalling the paper guide
plates [1], make sure that the film
side must face the roller.