Field Service Ver. 2.1 Feb. 2012
4.9
Paper feed section
4.9.1
Replacing the tray 1 feed roller/tray 1 pick-up roller
A. Periodically replacing parts/cycle
• Tray 1 feed roller: Every 300,000 counts
• Tray 1 pick-up roller: Every 300,000 counts
B. Procedure
1. Remove the tray 1 paper feed unit.
See P.66
2. Remove the tray 1 separation roller unit.
See P.41
[2]
[1]
[2]
4. PERIODICAL MAINTENANCE PROCEDURE
[1]
A0EDF2C016DA
[1]
[2]
[3]
A0EDF2C017DA
3. Remove four screws [1], and remove
the tray 1 feed roller cover [2].
4. Remove two C-clips [1] and two
bearings [2], and remove the tray 1
pick-up roller assy [3].
39