License Settings-Get Request Code; License Settings-Install License; License Settings-List Of Enabled Functions - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
10.6.93

License Settings-Get Request Code

A. Use
• To display and print a request code and serial number used to activate i-Option.
• Used to confirm the request code and serial number.
B. Procedure
1. Touch [Get Request Code], and [Yes].
2. A serial number and request code are issued.
3. By touching [Print], the serial number and request code are printable.
10.6.94

License Settings-Install License

• This is displayed only when the additional memory included in the optional upgrade kit
UK-203 is installed.
A. Use
• To allow administrator to activate functions provided by i-Option.
• Used when administrator activates functions provided by i-Option.
• By selecting a desired function and entering the corresponding license code, the function
can be activated.
• By making settings in [Service Mode] → [Billing Setting], CE can also activate functions
provided by i-Option.
B. Procedure
1. Touch [Install License].
2. Touch [Select Function].
3. Select i-Option function to be activated, and touch [Yes].
4. Touch [OK].
5. Touch [License Code].
6. Enter the license code that was issued in the license management server using the key
board on the control panel, and touch [OK].
7. Touch [Install] key.
8. Confirm the message, select [Yes], and touch [OK].
9. Turn OFF and ON the main power switch.
10.6.95

License Settings-List of Enabled Functions

• This is displayed only when the additional memory included in the optional upgrade kit
UK-203 is mounted.
A. Use
• To display currently activated functions.
• Used to check the functions that are activated now.
10. UTILITY
355