Konica Minolta bizhub C360 Service Manual page 354

Field Service Ver. 2.1 Feb. 2012
(4) Read User Name Settings
<Use>
• To set the read-only user name used for SNMP v3.
<Procedure>
1. Touch [Read User Name].
2. Enter the read user name (up to 32 characters) on the on-screen keyboard, and touch
[OK].
NOTE
• The user Name same with the discovery user name cannot be used.
(5) Security Level
<Use>
• To set the security level of the read-only user used for SNMP v3.
OFF
auth-password : Conducts authentication only for the authentication password when
auth-password/priv-password
<Procedure>
• The default setting is auth-password/priv-password.
OFF
(6) Password Setting
<Use>
• To set the authentication password for the read-only user which is used for SNMP v3.
<Procedure>
1. Select a type of password.
2. Enter the password (up to 32 characters) on the on-screen keyboard, and touch [OK].
(7) Write User Name Settings
<Use>
• To set the name of the reading/writing authority user which is used for SNMP v3.
<Procedure>
1. Touch [Write User Name].
2. Enter the write user name (up to 32 characters) on the on-screen keyboard, and touch
[OK].
NOTE
• The user name same with the discovery use name cannot be used.
: No authentication will be conducted when the read-only user
accesses.
the read-only user accesses.
: Conducts authentication by authentication password and privacy
password when read-only user accesses.
auth-password "auth-password/priv-password"
10. UTILITY
299