Replacing The Manual Bypass Tray Separation Roller Assy - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
7. To reinstall, reverse the order of removal.
8. Replace the manual bypass tray separation roller assy.
See P.45
9. Select [Service Mode] → [Counter] → [Life] and clear the count of [Manual Tray].
See P.453
4.9.6

Replacing the manual bypass tray separation roller assy

A. Periodically replacing parts/cycle
• Manual bypass tray separation roller assy: Every 200,000 counts
B. Procedure
1. Remove the rear right cover.
See P.56
[1]
4. Open the right door.
4. PERIODICAL MAINTENANCE PROCEDURE
2. Disconnect two connectors [1].
[1]
A0EDF2C007DA
3. Remove three screws [1], and
[2]
A0EDF2C008DA
remove right door hinge cover [2].
45