Pc Control Board (Pccb); Tray3 Lift-Up Motor (M124) / Tray4 Lift-Up Motor (M125) - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 1.0 Jul. 2009
3.4.3

PC Control board (PCCB)

1. Remove the rear cover.
See P.12
[2] [1]
[1]
4. Reinstall the above parts following the removal steps in reverse.
3.4.4

Tray3 lift-up motor (M124) / Tray4 lift-up motor (M125)

1. Remove the rear cover.
See P.12
[3]
4. Follow the same procedure as the above to remove the tray4 lift-up motor.
5. Reinstall the above parts following the removal steps in reverse.
A0XWF2C009DA
[1]
[2]
A0XWF2C010DA
3. OTHER MAINTENANCE ITEM
2. Disconnect all connectors of the PC
control board.
3. Remove six screws [1], and remove
the PC control board [2].
2. Disconnect the connector [1].
3. Remove three screws [2], and
remove the tray3 lift-up motor [3].
13