10. UTILITY
10.6.30
User Authentication/Account Track-External Server Settings
A. Use
• Registers and sets an external server that is used for user authentication.
B. Procedure
1. Select one from No. 1 to No. 20 and touch [NEW].
2. Set [Server Name] and [Server Type].
3. To change settings, select an external server to be edited and touch [Edit].
<Server Type>
Active Directory
NOTE
• Neither [NTLM v1] nor [NTLM v2] appear when OFF is selected in the following set-
ting.
[Administrator Settings] → [Network Settings] → [SMB Settings] → [User Authenti-
cation (NTLM)]
• [NDS] does not appear when OFF is selected in the following setting.
[Administrator Settings] → [Network Settings] → [NetWare Settings] → [User
Authentication Setting (NDS)]
10.6.31
User Authentication/Account Track-Limiting Access to Destinations
A. Create Group
(1) Use
• Registers and edits groups of destinations for limiting access.
(2) Procedure
1. Select a group and touch [Edit].
2. Enter [Group Name].
3. Set the Access Allowed Level and touch [OK].
B. Apply Levels/Groups to Destinations
(1) Use
• Sets Apply Level and Apply Group for individual destinations.
(2) Procedure
1. Select one from Address Book, Group, and Program.
2. Select a registered address. Touch [Apply Group] and [Apply Level] independently to
make each settings.
C. Apply Levels/Groups to Users
(1) Use
• Sets Apply Level or Apply Group for individual users.
(2) Procedure
1.
Select a registered user. Touch [Apply Group] and [Apply Level] independently to make
each settings.
268
NTLM v1
NTLM v2
Field Service Ver. 2.1 Feb. 2012
NDS
LDAP