12. SERVICE MODE
12.17.5
HTTP Setting-Proxy Server
A. Use
• To set the address and the port number for the proxy server.
• To use when accessing the server via proxy server.
B. Procedure
<Server Address>
• Enter an address using IPv4, IPv6, or FQDN format.
<Port Number>
• Enter the value between 1 and 65535 using the 10-key pad.
(The default setting is 80)
12.17.6
HTTP Setting-Proxy Authentication
A. Use
• To set the login name or password when authentication is necessary for accessing the
proxy server.
• To use when authentication is necessary for accessing the proxy server.
B. Procedure
<Authentication>
• The default setting is OFF.
<Log-in Name>
• Enter the login name (up to 32 one-byte characters) on the on-screen keyboard.
<Password>
• Enter the password (up to 32 one-byte characters) on the on-screen keyboard.
12.17.7
HTTP Setting-Connection Time-Out
A. Use
• To set the time for the timeout for accessing the server.
B. Procedure
• The default setting is 60 sec.
12.17.8
FTP Setting
• It will be displayed only when [Internet ISW Set] is set to "ON".
12.17.9
FTP Setting-Data Input Setting
A. Use
• To set whether or not to enable downloading using FTP protocol.
• To use when accessing the server with FTP protocol.
• Setting this to "ON" will enable the proxy server setting.
B. Procedure
• The default setting is ON.
506
ON
30 to 300 sec.
"ON"
Field Service Ver. 2.1 Feb. 2012
"OFF"
OFF