Management Function Choice-Management Device 1; Management Function Choice-Management Device 2; Management Function Choice-Vendor 1; Management Function Choice-Vendor 2 - Konica Minolta bizhub C360 Service Manual

14. BILLING SETTING
✽ Count Setting
2
• To set the count timing used when the key counter is installed.
• The default setting is paper feed.
14.3.7

Management Function Choice-Management Device 1

A. Use
• To set whether or not the management device 1 is installed.
B. Procedure
NOTE
• The setting is available only when user authentication is set "OFF" and account
track is set "Off" or "Account Name + Password" with [Administrator Settings] →
[User Authentication/Account Track] → [General Settings].
14.3.8

Management Function Choice-Management Device 2

A. Use
• To set whether or not the management device 2 is installed.
B. Procedure
✽ Management Setting
• Select the Management Setting Mode
Mode 1: Use contact type device (Logout with ID key is not allowed.)
Mode 2: Use non-contact type device (Logout with ID key is allowed.)
NOTE
• The setting is not available when either "External Server" of user authentication,
"Password Only" of account track, "Do not synchronize" of user authentication
and account track or "Allow" of public user access has been set with [Administra-
tor Settings] → [User Authentication/Account Track] → [General Settings].
14.3.9

Management Function Choice-Vendor 1

• Not used.
524
2
"Paper feed"
Field Service Ver. 2.1 Feb. 2012
Paper out