Konica Minolta bizhub C360 Service Manual page 686

Field Service Ver. 2.1 Feb. 2012
(2) When FS-529 is installed
Tray up/down motor (M2)
Tray lower limit sensor (PS6)
Paper surface detect sensor/1 (PS2)
Paper surface detect sensor/2 (PS3)
Step
Check the connector between M2-FSCB
1 CN12 for proper connection and correct as
necessary.
Check the connector between PS6-FSCB
2 CN5 for proper connection and correct as
necessary.
Check the connector between PS2-FSCB
3 CN4 for proper connection and correct as
necessary.
Check the connector between PS3-FSCB
4 CN4 for proper connection and correct as
necessary.
Check the connector of M2 for proper drive
5
coupling, and correct as necessary.
6 PS6 I/O check, sensor check
7 PS2 I/O check, sensor check
8 PS3 I/O check, sensor check
9 M2 operation check
10 Change M2
11 Change FSCB
Relevant parts
Action
FS control board (FSCB)
WIRING DIAGRAM
Control signal
—
—
—
—
—
FSCB CN5-9 (ON)
FSCB CN4-3 (ON)
FSCB CN4-6 (ON)
FSCB CN12-1 to 2
—
—
19. TROUBLE CODE
Location (Electri-
cal component)
—
—
—
—
—
FS-529 B-2
FS-529 B-3
FS-529 B-2
FS-529 G-2
—
—
631