Konica Minolta bizhub C360 Service Manual page 1056

Field Service Ver. 1.0 Jul. 2009
[2]
7. Reinstall the above parts following the removal steps in reverse.
3.3.21 Elevate motor (M15)
1. Remove the finisher from the main body.
See P.14
2. Remove the upper cover.
See P.11
3. Remove the rear cover.
See P.11
[1]
[3]
[1]
8. Reinstall the above parts following the removal steps in reverse.
[1]
A0HRF2C040DA
[2]
A0HRF2C026DA
[2]
[3]
A0HRF2C041DA
3. OTHER MAINTENANCE ITEM
6. Remove two screws [1], and remove
the accommodation paddle motor
[2].
4. Disconnect the connector [1].
5. Remove three screws [2], and
remove the elevate motor assy [3].
6. Disconnect the connector [1].
7. Remove four screws [2], and remove
the elevate motor [3].
29