Konica Minolta bizhub C360 Service Manual page 302

Field Service Ver. 2.1 Feb. 2012
K. Line Detection
(1) Prior Detection Setting
<Use>
• To set whether or not to perform pre-detection of stain on the ADF original glass.
• To set the detection level of the pre-detection of stain on the ADF original glass.
• To set how to display the warning when stain on the ADF original glass is detected.
• Use when changing the display of the warning which requests the cleaning of the stain
on the glass detected by the pre-detection of the lines.
TYPE1 : Warning will be displayed by the maintenance mark. (warning code: D-1)
TYPE2 : Warning will be displayed on the message area on the basic screen.
TYPE3 : Warning will be displayed on all screens.
OFF : Warning will not be displayed.
• Use when changing the detection level for the pre-detection of stain on the original glass.
Low : Stain on the glass will not be detected easily.
Normal : Normal detection level
High : Stain on the glass will easily be detected.
<Procedure>
• The default setting is Yes.
NOTE
• [Warning Level] and [Detection Level] can be set when "Yes" is selected.
• Be aware that selecting "No" and performing the pre-detection with the following
setting will display "NG."
[Service Mode] → [Machine] → [ADF Scan Glass Contamination]
2
• When "No" is selected, the original glass cleaning operation after the job ends
does not operate.
<Warning Level>
• The default setting is TYPE2.
TYPE1
<Detection Level>
• The default setting is Std.
Low
(2) Feed Cleaning Settings
<Use>
• To set the operation for detection and removing operation of stain on the ADF original
glass when feeding the original.
• Use when changing the operation for detection and removing operation of stain on the
ADF original glass when feeding the original.
Do not remove : Cleaning is not conducted as the cleaning brush does not rotate.
Remove
<Procedure>
• The default setting is Remove.
"Yes"
"TYPE2"
"Std."
: Glass is cleaned with the cleaning brush rotating at one original inter-
mittent.
"Remove"
No
TYPE3 OFF
High
Do not remove
10. UTILITY
247
2