System Settings-Standard Size Setting - Konica Minolta bizhub C360 Service Manual

10. UTILITY
H. Allow/Restrict User Box
(1) Use
• Specify whether to release functions so that the user can create, edit, or delete a User
Box.
(2) Procedure
• The default setting is Allow.
I. ID & Print Delete after Print Setting
(1) Use
• Select whether to check that the document saved in the ID & Print User Box has been
deleted after printed.
(2) Procedure
• The default setting is Confirm with User.
"Confirm with User"
J. Document Delete Time Setting
(1) Use
• This function enables the administrator to specify the time to delete a document from a
User Box when you cannot specify the document deletion time. When automatically
specifying the document deletion time, select [Yes] and set the deletion time.
(2) Procedure
• The default setting is 1 Day.
12 Hours "1 Day"
10.6.11

System Settings-Standard Size Setting

• It will be displayed only when the following setting is set to "Level 2."
[Service Mode] → [Enhanced Security] → [Administrator Feature Level]
A. Original Glass Original Size Detect
(1) Use
• To change the document size detection table.
(2) Procedure
• The default setting is Table1.
B. Foolscap Size Setting
(1) Use
• To set the size for foolscap paper.
• Upon setup.
(2) Procedure
• Select the size from among the following five.
220 x 330 mm
254
"Allow"
2 Days 3 Days
"Table1"
8 / x 13 8 /
1 1
2
Field Service Ver. 2.1 Feb. 2012
Prohibit
Always Delete
7 Days 30 Days
Table2
x 13 8 / x 13 /
1 1
4 8
Save
"8 x 13"
4