Administrator/Machine Settings-Input Machine Address; One-Touch/User Box Registration-Create One-Touch Destination - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
10.6.20

Administrator/Machine Settings-Input Machine Address

A. Use
• To register the name of the machine and e-mail address.
Machine Name : When the file name of the transmitted file or the document name of
E-mail
B. Procedure
1. Touch [Device Name] and input the name.
2. Touch [E-mail Address] and input the E-mail address.
10.6.21

One-Touch/User Box Registration-Create One-Touch Destination

A. Address Book
(1) E-mail
<Use>
• To register/change the e-mail address for transmitting the scanned data by e-mail.
<Procedure>
• Touch [New] to register the new address.
• Select any displayed address to check, edit, or delete the setting.
(2) User Box
• It will not be displayed when the following setting shows that authentication device or the
vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
<Use>
• To register or change the box address for storing the scanned data to the box in the hard
disk of the machine.
<Procedure>
• Touch [New] to register the new address.
• Select any displayed address to check, edit, or delete the setting.
• At least one user box must be registered in order to register the box address.
(3) Fax
<Use>
• To register or change the fax number for transmitting the fax.
<Procedure>
• Touch [New] to register the new address.
• Select any displayed address to check, edit, or delete the setting.
(4) PC (SMB)
<Use>
• To register or change the SMB address for transmitting the scanned data by SMB.
<Procedure>
• Touch [New] to register the new address.
• Select any displayed address to check, edit, or delete the setting.
document registered in Box is generated automatically, it is added.
: To be used as from address at internal Fax transmission.
10. UTILITY
257