Create User Box-Bulletin Board User Box; Create User Box-Relay User Box - Konica Minolta bizhub C360 Service Manual

10. UTILITY
10.4.6

Create User Box-Bulletin Board User Box

• It will not be displayed when the authentication device 1 is set to "Set" by the following
setting.
[Service Mode] → [Billing Setting] → [Management Function Choice]
• It will not be displayed when the following setting shows that the vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(It will be displayed when the key counter is mounted.)
• It will not be displayed due to functional restriction upon user authentication when [User
Box] is set to "OFF."
• It will be displayed only when the optional fax kit (FK-502) is mounted.
• It will not be displayed during user authentication if the fax operation is set to "Restrict" by
the function restriction.
A. Use
• To register/change the bulletin board user box.
B. Procedure
• A new box can be registered by touching [New].
• Select any displayed box to change or delete it.
10.4.7

Create User Box-Relay User Box

• It will not be displayed when the authentication device 1 is set to "Set" by the following
setting.
[Service Mode] → [Billing Setting] → [Management Function Choice]
• It will not be displayed when the following setting shows that the vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(It will be displayed when the key counter is mounted.)
• It will not be displayed due to functional restriction upon user authentication when [User
Box] is set to "OFF."
• It will be displayed only when the optional FAX kit (FK-502) is mounted.
• It will be displayed when the following setting is set to "ON."
[Service Mode] → [FAX] → [System] → [Display Setting] → [Relay]
A. Use
• To register/change the Relay User Box.
B. Procedure
• A new box can be registered by touching [New].
• Select any displayed box to change or delete it.
186
Field Service Ver. 2.1 Feb. 2012