Ph Unit - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
[2]
[1]
5.5.27

PH unit

• Do not replace the printer head unit while the power is ON.
Laser beam generated during the above mentioned activity may cause
blindness.
• Do not disassemble or adjust the printer head unit.
Laser beam generated during the above mentioned activity may cause
blindness.
A. Removal procedure
1. Remove the DC power supply.
See P.96
2. Remove the PH relay board.
See P.97
[2] [1]
8. Remove four screws [1], and remove
A0EDF2C077DA
CAUTION
3. Remove the harnesses from three
A0EDF2C078DA
5. OTHER MAINTENANCE ITEMS
the tray 2 paper feed unit [2].
wire saddles [1] and the edge cover
[2].
69