Paper Passage - Konica Minolta bizhub C360 Service Manual

All-in-one color laser mfp

Hide thumbs Also See for bizhub C360:

Table of Contents

12. SERVICE MODE

Paper Passage

• To check for paper passage through the ADF in each of the ADF modes.

• Used for checking the document path for any abnormal condition when a document mis-

feed occurs.

B. Procedure

1. Call the Service Mode to the screen.

2. Touch [ADF] → [Paper Passage].

3. Select a paper passage mode to be tested from [1-Sided No Detect], [1-Sided Mixed

Org.], [2-Sided], or [AMS Mixed Org.].

4. Set the original in the feed tray.

5. The Start key changes from orange to blue.

6. Press the Start key. The operation starts.

• After starting the operation by pressing the Start key, if the Start key is pressed

during the operation, the operation will be suspended. Then, if the Start key is

pressed again during the suspension, the operation will be resumed.

• If the Stop key is pressed during the test operation, the test will be forced to end.

• If there is no Original set in the feed Tray, the Start key will not work.

• All Originals set in the feed Tray are passed through. Upon the completion of all

Originals passed through, the Paper Through Test ends.

Field Service Ver. 2.1 Feb. 2012

Show Quick Links

Table of Contents

Bizhub c280 Bizhub c220