Center Staple Alignment Motor/F (M24) - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.0 Jan. 2010
3.3.12

Center staple alignment motor/F (M24)

1. Remove the saddle unit.
See P.7
2. Remove the right cover.
See P.6
[2]
[1]
[1]
[2]
6. Reinstall the above parts following the removal steps in reverse.
[1]
A10DF2C018DA
[3]
A10DF2C020DA
3. OTHER MAINTENANCE ITEM
3. Remove four screws [1], and remove
the plate [2].
4. Disconnect the connector [1].
5. Remove two screws [2], and remove
the center staple alignment motor/F
[3].
17