Konica Minolta bizhub C360 Service Manual page 1057

3. OTHER MAINTENANCE ITEM
3.3.22 Tray2 shift motor (M16)
1. Remove the finisher from the main body.
See P.14
[3]
[2]
[2]
30
[1]
A0HRF2C042DA
[1]
A0HRF2C512DA
[1] [2]
A0HRF2C043DA
Field Service Ver. 1.0 Jul. 2009
2. Disconnect two connectors [1].
3. Remove three screws [2], and
remove the tray2 shift motor assy [3].
4. Remove the screw [1], and remove
the gear assy [2].
5. Remove two screws [1], and remove
the tray2 shift motor [2].
6. Reinstall the above parts following
the removal steps in reverse.