Adf Scan Glass Contamin. Set - Konica Minolta bizhub C360 Service Manual

12. SERVICE MODE
8. Using the "get" command, transfer the data for capture to PC.
9. Finish the command prompt.
NOTE
• After receiving capture data, select [Administrator Settings] → [Security Settings]
→ [Security Details], and select [Restrict] for print data capture in order to delete
the job data stored in the hard disk.
When HDD Format or Overwrite Temporary Data is performed, job data is deleted.
12.9.12 ADF Scan Glass Contamin. Set.-ADF Scan Glass Contamin. Sensitivity
2
A. Use
• To set the detection level for the pre-detection of stain on the ADF original glass.
• Use when changing the setting for whether or not to detect the stain on the ADF original
glass when opening/closing ADF as well as its detection level as the main/sub power
being ON, recovering from the sleep/low power mode, etc.
Not Set : Detection of stain on the glass will not be conducted.
Low : Stain on the glass will not be detected easily.
Normal : Normal level detection.
High : Stain on the glass will easily be detected.
NOTE
• Be aware that selecting "Not Set" and performing the pre-detection with the fol-
lowing setting will display "NG."
[Service Mode] → [Machine] → [ADF Scan Glass Contamination]
2
• When "Not Set" is selected, the original glass cleaning operation after the job
ends does not operate.
B. Procedure
• The default setting is "Normal."
Not Set
446
2
Low
Field Service Ver. 2.1 Feb. 2012
"Normal" High
A0P0F3E551DA