Paper Passage Motor/1 (M1) - Konica Minolta bizhub C360 Service Manual

3. OTHER MAINTENANCE ITEM
3.3.10

Paper passage motor/1 (M1)

1. Remove the finisher from the main body.
See P.14
2. Remove the horizontal transport unit.
See P.15
[1]
[2]
[2]
7. Reinstall the above parts following the removal steps in reverse.
18
A0HRF2C015DA
[1] [3]
[2]
A0HRF2C016DA
[1]
A0HRF2C017DA
Field Service Ver. 1.0 Jul. 2009
3. Remove five screws [1], and remove
the rear cover [2] of the horizontal
transport unit.
4. Disconnect the connector [1].
5. Remove four screws [2], and remove
the paper passage motor assy [3].
6. Remove two screws [1], and remove
the paper passage motor/1 [2].