Konica Minolta bizhub C360 Service Manual page 379

10. UTILITY
(3) Relay Printing
• It will be displayed when the following setting is set to "ON."
[Service Mode] → [FAX] → [System] → [Display Setting] → [Relay]
<Use>
• To set whether to use the relay print function.
• To print out the document that the machine relayed during relay TX.
• The relay print will be output in the following case.
1. When the relay delivery completes appropriately.
2. When the delivery job is cancelled halfway by turning OFF sub power switch.
3. When the delivery job is cancelled due to redial over.
4. When main power switch is turned OFF/ON during relay print error.
5. When delivery job is deleted in user operation during redialing.
6. When delivery job is deleted in user operation during relay delivery.
<Procedure>
• The default setting is OFF.
(4) Destination Check Display Function
<Use>
• To set whether or not to display the list of specified addresses when sending the fax.
<Procedure>
• The default setting is OFF.
(5) Confirm Address (TX)
<Use>
• To set whether to use Confirm Address (the machine displays the screen where the user
reenters the fax number for confirmation when the user faxes by entering the fax number
directly with the keys).
<Procedure>
• The default setting is OFF.
(6) Confirm Address (Register)
<Use>
• To set whether to use Confirm Address (the machine displays the screen where the user
reenters the fax number for confirmation when the user faxes by entering the fax number
directly with the keys).
<Procedure>
• The default setting is OFF.
324
ON
ON
ON
ON
Field Service Ver. 2.1 Feb. 2012
"OFF"
"OFF"
"OFF"
"OFF"