Replacing The Tray 1 Separation Roller Assy - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
[1]
10. To reinstall, reverse the order of removal.
11. Replace the tray 1 separation roller assy.
See P.41
12. Select [Service Mode] → [Counter] → [Life] and clear the count of [1st.].
See P.453
4.9.2

Replacing the tray 1 separation roller assy

A. Periodically replacing parts/cycle
• Tray 1 separation roller assy: Every 300,000 counts
B. Procedure
1. Remove the tray 1 paper feed unit.
See P.66
[3]
[1]
4. PERIODICAL MAINTENANCE PROCEDURE
[2]
A0EDF2C022DA
[2] [1]
A0EDF2C023DA
9. Remove the C-ring [1], and remove
the tray 1 feed roller [2].
2. Unhook two tabs [1], and remove the
jam clearing cover [2].
NOTE
• When removing the jam clearing
cover, be careful not to lose the
springs [3].
41