Configure The Quescom 400 Ip/Gsm; Quescom Server Configuration - Avaya QuesCom 400 Application Notes

4. Configure the QuesCom 400 IP/GSM

This section describes the steps for configuring the QuesCom 400 gateway. The steps are
provided for illustration only; users should consult with Quescom for specific instructions.

4.1. QuesCom Server Configuration

Step
1. After the initial installation of the QuesCom server, telnet into the QuesCom server from the
management PC shown in figure 1, using the default IP address "192.168.1.1.". Log in using the
appropriate username and password.
C:\> telnet 192.168.1.1
login: administrator
Password: ********
Q400 IP/GSM Series, Serial# Q400-B4-00010381, Version IAD04.20B029P006
Security Patch SP001
Copyright (c) 1998-2005 QuesCom S.A.
At the prompt, type the following command gwconfig /setup.
X:\>gwconfig /setup
Application has been registered to the QCFGSvc
QCFGSvc Version 4.20.000.012
Copyright (c) 1998-2006 QuesCom S.A.
Enter "1" for English.
Enter the SmartIAD Administration language [1]:
> 1
GWconfig language: English
Enter a name for the QuesCom 400 gateway.
Setting up SmartIAD components...
Enter the SmartIAD network name [Q400]:Q400
SmartIAD Network Name: Q400
Enter IP address for the QuesCom gateway.
Enter the SmartIAD IP address [192.168.1.1]: 10.1.10.55
The SmartIAD IP address: 10.1.10.55
HJP; Reviewed:
SPOC 9/14/2006
1 English
2 French
3 German
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
Description
13 of 27
QuescomACM_H323