Save Translations; Add Packet Bus Support; Disable Alarm Origination; Install Circuit Packs - Avaya CMC1 Installation Manual

Adding or Removing Hardware

Add Packet Bus Support

Save Translations

1
Type save translation and press Enter. This instructs the system to take all translation
information in memory and write it to the translation cards.
2
Update backup cards, if necessary.
Add Packet Bus Support

Disable Alarm Origination

1
Type change system-parameters maintenance and press Enter.
2
Set the
Alarm Origination Activated
CAUTION:
If you do not disable Alarm Origination, the system may generate alarms, resulting in
unnecessary trouble tickets.
3
For some DEFINITY ECS software versions, disable
Restart Notification
Save Translations
1
Type save translation and press Enter. This instructs the system to take all translation
information in memory and write it to the translation card.

Install Circuit Packs

1
Install the appropriate TN circuit packs. See
Table 56: Circuit Pack Locations for Packet Bus in PPN
Circuit
Pack
TN799DP

Administer the Bus Bridge

1
Type change system-parameters maintenance and press Enter.
2
On Page 2, Type y in the
3
Choose the port bandwidths or use the default and submit the form.
4
Verify the bus bridge LED is lit on the TN799DP C-LAN circuit pack. This indicates that the
packet bus is enabled.
228
before submitting the form.
Carrier Quantity
Any 1
field.
PKTINT 2
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
field to n.
Cleared Alarm Notification
Table 56.
Slot
Any Available Port Slot
and
June 2004